Tandberg Data DPS Expansion Module Disk Pack Specifikace stáhnout pdf (Strana 23)

Unpacking and Cabling DPS Expansion Module | 17

Installing the disk I/O modules

The XDS1200a-1 model used with DPS1000 Series has one disk I/O module.

Install the disk I/O module as follows:

1. Check for damage, especially to the interface connector.

CAUTION

Handle the module carefully and avoid damaging the connector pins. Do not

install the module if any pins appear to be bent.

2. With the latches in the open position, slide the disk I/O module into the lower bay located

on the right hand side of the enclosure until the latches engage.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Žádné komentáře

Tandberg Data DPS Expansion Module Disk Pack Specifikace Strana 23