Tandberg Data DPS Expansion Module Disk Pack Specifikace stáhnout pdf (Strana 20)

14 | Unpacking and Cabling DPS Expansion Module

Installing the cooling fan module

Install the cooling fan module as follows:

1. Check for damage, especially to the rear connector on the module.

CAUTION

Handle the module carefully and avoid damaging the connector pins. Do not

install the module if any pins appear to be bent.

2. With the latch in the open position, slide the module into the enclosure until the latch

engages.

3. Secure the module by manually closing the latch. You will hear a click as the latch

engages.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Žádné komentáře

Tandberg Data DPS Expansion Module Disk Pack Specifikace Strana 20