Tandberg Data 8174-LTO Uživatelská příručka

Procházejte online nebo si stáhněte Uživatelská příručka pro Páskové automatické zavaděče a knihovny Tandberg Data 8174-LTO. Tandberg Data 8171-LTO Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 109
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - 2009-04-20

Revision 433599-05 2009-04-20

Strany 3

100 Shipping or Transporting the StorageLibrary Table 15. Troubleshooting Matrix - Errors Displayed on Front Panel with Solution Problem Solution

Strany 4 - Table of Contents

StorageLibrary T40+ Series Installation and User Guide 101 13 13 Shipping or Transporting the StorageLibrary Re-inserting the Transport Locking Scr

Strany 5 - 7 Running the Library 63

102 Shipping or Transporting the StorageLibrary Figure 43. Transport Locking Screws Marked with Red Plastic Tab Packing the StorageLibrary If you

Strany 6 - 12 Troubleshooting 87

StorageLibrary T40+ Series Installation and User Guide 103 14 14 Specifications Tandberg Data StorageLibrary T40+ Series follows the specifications

Strany 7 - 16 Approved Drive Types 109

104 Specifications Library Dimensions Table 19. Library Dimensions T40+ Dimensions Width 445.0 mm +/- 0.5 mm (17.52” +/- 0.02”) Height 176.4 mm

Strany 8 - Figures

StorageLibrary T40+ Series Installation and User Guide 105 Power Requirements Table 21. Library Power Requirements Power Requirements Values Input

Strany 10

StorageLibrary T40+ Series Installation and User Guide 107 15 15 Safety and Regulatory Information Safety Approvals This product complies with the f

Strany 11 - 1 About This Guide

108 Safety and Regulatory Information USA FCC: 47 CFR Part 15 Subpart B, Class A Note: This equipment has been tested and found to comply with the l

Strany 12 - Other Documents You May Need

StorageLibrary T40+ Series Installation and User Guide 109 16 16 Approved Drive Types Table 25. Approved Drive Types and Compatible Cartridges LTO

Strany 13 - 2 Product Overview

StorageLibrary T40+ Series Installation and User Guide 11 1 1 About This Guide This guide contains information and instructions necessary for the no

Strany 14 - Product Description

12 About This Guide Other Documents You May Need The following documents are also available for this product. These documents can be found at www.t

Strany 15 - Rear Panel

StorageLibrary T40+ Series Installation and User Guide 13 2 2 Product Overview The Tandberg Data StorageLibrary T40+ Series is a professional tape b

Strany 16

14 Product Overview Product Description Tape Drive Support For additional specification information for this model, see Specifications. The drive

Strany 17 - Library Features

StorageLibrary T40+ Series Installation and User Guide 15 Figure 1. Front Panel of the StorageLibrary Control Buttons The labels for the four contr

Strany 18 - Browser Requirements

16 Product Overview • A shielded male HD68 SCSI terminator • SAS port cable • FC port cable Ethernet Port This port is for networking in suppor

Strany 19 - Unpacking

StorageLibrary T40+ Series Installation and User Guide 17 Library Features This section describes several features of the StorageLibrary. Operator I

Strany 20

18 Product Overview StorageLibrary comes with 24 slots (two lower magazines) and supports licensing of an additional 16 slots (two upper magazines

Strany 21 - 4 Hardware Installation

StorageLibrary T40+ Series Installation and User Guide 19 3 3 Unpacking the StorageLibrary This chapter provides detailed information for preparing

Strany 23

20 Unpacking the StorageLibrary To unpack the StorageLibrary, follow the instructions below. Carefully unpack the unit from the shipping container

Strany 24

StorageLibrary T40+ Series Installation and User Guide 21 4 4 Hardware Installation This chapter provides the following information: • Preparing fo

Strany 25

22 Hardware Installation Preparing for Installation The procedures for mounting the unit(s) in a rack are described in this chapter and consist

Strany 26

StorageLibrary T40+ Series Installation and User Guide 23 The holes and the text on the stencil ensure the correct vertical position for the rails o

Strany 27

24 Hardware Installation 11) Slide the unit(s) fully into the rack and fasten them by mounting the ears to the rack using the two M6x12mm pan-hea

Strany 28

StorageLibrary T40+ Series Installation and User Guide 25 Figure 4. Position of the Rack Installation Stencil (Front View) Figure 5. Matching

Strany 29

26 Hardware Installation Figure 6. Position of the Rack Installation Stencil (Rear View) Figure 7. Aligning of the Rack Installation Ste

Strany 30

StorageLibrary T40+ Series Installation and User Guide 27 Figure 8. The Rail Assemblies Figure 9. Screw Mounting Sequence (Front View) Foll

Strany 31

28 Hardware Installation Figure 10. Rear View of the Rack Figure 11. Rack-Ear Mounting Holes FRONT VIEW These holes are for mount

Strany 32

StorageLibrary T40+ Series Installation and User Guide 29 Caution Remove only the upper blanking plate of the lower-most unit (Master Library), the

Strany 33

Copyright © 2009 Tandberg Data ASA The information contained in this document is subject to change without notice. This document contains proprieta

Strany 34 - Mounting the Rack mount Ears

30 Hardware Installation Figure 14. Slide the units onto the rails, leaving ~100mm for ear mounting Figure 15. Remove the transport locking

Strany 35 - Connecting SCSI Cables

StorageLibrary T40+ Series Installation and User Guide 31 Figure 16. Mount the ears on the side of the units Figure 17. Ear screws mounting s

Strany 36 - Connecting SAS Cables

32 Hardware Installation Figure 18. Install the Pass-Thru box in the Pass-Thru magazine Figure 19. Exchange the right lower-most magazine

Strany 37

StorageLibrary T40+ Series Installation and User Guide 33 Figure 20. The Complete System Remove the Transport Locking Screws To protect the lib

Strany 38 - System Power-on

34 Hardware Installation The transport locking screws will be detected when the StorageLibrary is powered on. To remove the screws follow the ins

Strany 39

StorageLibrary T40+ Series Installation and User Guide 35 Installing the Library Cables After mounting the StorageLibrary into a rack, you must conn

Strany 40

36 Hardware Installation 3. Connect a power cord to the outlet on the power supply at the back of the library. 4. Power on the library by turn

Strany 41 - 5 Operator Interfaces

StorageLibrary T40+ Series Installation and User Guide 37 Connecting Fibre Channel Cables Use this procedure if you are installing a library that i

Strany 42 - Menu Trees

38 Hardware Installation System Power-on At power-on, for the first few seconds the unit performs a sequence of diagnostic tests called Power-On

Strany 43

StorageLibrary T40+ Series Installation and User Guide 39 Labeling Cartridges for the Barcode Reader If you want to use the barcode reader functiona

Strany 44 - 44 Operator Interfaces

iv Contents Table of Contents 1 About This Guide 11 Waste Electrical and Electronic Equipment Directive...

Strany 46

StorageLibrary T40+ Series Installation and User Guide 41 5 5 Operator Interfaces The StorageLibrary has two operator interfaces: the Front Panel In

Strany 47

42 Operator Interfaces Remote Management Interface (RMI) The remote management interface (RMI) is similar to the front panel interface (FPI). The r

Strany 48

StorageLibrary T40+ Series Installation and User Guide 43 Figure 28. Front Panel Interface (FPI) Top Level Menu Tree HomeMenu Open IE Slot Maps Dri

Strany 49 - 6 Configuring the Library

44 Operator Interfaces Figure 29. Remote Management Interface (RMI) Top Level Menu Tree HomeOperations Setup Reports ToolsAssign MediaImport Media

Strany 50 - Setup Wizard Tasks

StorageLibrary T40+ Series Installation and User Guide 45 Home Screen The RMI Home Screen is shown in Figure 30. To navigate in the RMI menu, use t

Strany 51

46 Operator Interfaces • Any operator or administrative user who is logged in and inactive for more than “N” minutes is automatically logged out.

Strany 52 - Configuring I/E Slots

StorageLibrary T40+ Series Installation and User Guide 47 Table 3. Cartridge Present Symbols on FPI during Inventory and in the Maps Menu Symbol on

Strany 54 - Configuring Partitions

StorageLibrary T40+ Series Installation and User Guide 49 6 6 Configuring the Library After you have installed the hardware described in the previou

Strany 55 - Changing Partition Modes

StorageLibrary T40+ Series Installation and User Guide v Connecting SAS Cables...

Strany 56 - Setting Drive ID

50 Configuring the Library Note You cannot delete the default Administrator account. You can, however, change the password. Using the Setup Wizar

Strany 57 - Setting Date and Time

StorageLibrary T40+ Series Installation and User Guide 51 • Configuring I/E Slots (FPI and RMI) - Allows you to configure the number of Import/Expo

Strany 58 - Configuring Network Settings

52 Configuring the Library Applying a License Key A license key can be purchased and applied to the library to increase the number of available slo

Strany 59 - Configuring RMI Password

StorageLibrary T40+ Series Installation and User Guide 53 I/E slots are shared by all partitions within a library. Before you change the number of I

Strany 60 - Configuring Notifications

54 Configuring the Library When the number of cleaning slots is decreased, the released slots are added to the partition owning the lower right mag

Strany 61

StorageLibrary T40+ Series Installation and User Guide 55 The user will also be asked to select which available magazines are to be included in the

Strany 62

56 Configuring the Library The library is automatically taken offline when the unit is busy executing internal time consuming tasks. In addition, t

Strany 63 - 7 Running the Library

StorageLibrary T40+ Series Installation and User Guide 57 If your library includes fibre channel or SAS tape drives, the Setup Drive ID screen shows

Strany 64

58 Configuring the Library Configuring Barcode Scan This feature allows the operator to enable or disable the barcode scanner from the front panel

Strany 65 - Unloading from Tape Drives

StorageLibrary T40+ Series Installation and User Guide 59 • From the RMI, select Setup > Network • From the FPI, select Menu > Setup > Ne

Strany 66 - Cleaning Tape Drives

vi Contents Auto Clean...

Strany 67 - Magazine Handling

60 Configuring the Library The remote Administrator has access to all features in the library. The remote operator has access to the same features

Strany 68

StorageLibrary T40+ Series Installation and User Guide 61 • Urgent - The library has failed or is in immediate danger of failing. A resolution must

Strany 70 - Standby Functionality

StorageLibrary T40+ Series Installation and User Guide 63 7 7 Running the Library This chapter explains how to access and operate your library. Most

Strany 71 - Library Settings

64 Running the Library Importing Cartridges via I/E Slot Note You can import cartridges using either the library interface or the host server sof

Strany 72 - Network

StorageLibrary T40+ Series Installation and User Guide 65 Import Cartridges via Bulk Loading of Magazines Another way to import cartridges is throug

Strany 73 - Event Log

66 Running the Library NB: When you are unloading tape drives, only drives loaded with media appear. The paths to open the appropriate screens are:

Strany 74

StorageLibrary T40+ Series Installation and User Guide 67 Manual Clean Both the front panel and the remote management interface provide menu and com

Strany 75 - Power Supply Unit

68 Running the Library Removing the Magazine from the Unit The following illustration shows the correct way to remove the magazine from its bay.

Strany 76 - Replacing a Power Supply

StorageLibrary T40+ Series Installation and User Guide 69 Removing Cartridges from the Magazine Gently press the cartridge release tab towards the

Strany 77

StorageLibrary T40+ Series Installation and User Guide vii 13 Shipping or Transporting the StorageLibrary 101 Re-inserting the Transport Locking Sc

Strany 78

70 Running the Library Manual/Emergency Release of Magazines In failure situations (either with the library itself, in the event of a power loss, o

Strany 79 - Tape Drive Unit

StorageLibrary T40+ Series Installation and User Guide 71 8 8 Getting Status and Information Operator and Administrator can view information about t

Strany 80

72 Getting Status and Information • SCSI ID <value as applicable> • Fibre Channel ID <value as applicable> • Fibre Topology <valu

Strany 81 - 10 Updating Firmware

StorageLibrary T40+ Series Installation and User Guide 73 Statistics The Statistics Report contains the following statistics of the library: • Numb

Strany 83

StorageLibrary T40+ Series Installation and User Guide 75 9 9 Adding, Removing and Replacing This chapter describes how to add, remove, and replace

Strany 84

76 Adding, Removing and Replacing Replacing a Power Supply These instructions explain how to remove a single power supply to replace it with a new

Strany 85 - Handling Cartridges Properly

StorageLibrary T40+ Series Installation and User Guide 77 Adding a Redundant Power Supply These instructions explain how to add a second (redundant

Strany 86 - Attaching Barcode Labels

78 Adding, Removing and Replacing Hot-Swapping a Redundant Power Supply These instructions explain how to hot-swap a redundant power supply in T40+

Strany 87 - 12 Troubleshooting

StorageLibrary T40+ Series Installation and User Guide 79 Tape Drive Unit Note To make sure you do not interrupt your host system, we recommend tha

Strany 88 - Supported RAS Tickets

viii Contents Figures Figure 1. Front Panel of the StorageLibrary...

Strany 89

80 Adding, Removing and Replacing 8. Install cover plates over the empty drive bay. Use a screwdriver to mount the plates. If you do not have enou

Strany 90

StorageLibrary T40+ Series Installation and User Guide 81 10 10 Updating Firmware The Administrative User is able to update firmware on the StorageL

Strany 91

82 Updating Firmware 2. Open Reports > Library on the library to verify that the library firmware was updated. NOTE: After uploading the file,

Strany 92

StorageLibrary T40+ Series Installation and User Guide 83 4. Verify Drive Firmware Update a. In TDkit, click Device Overview and take a look at t

Strany 94 - Verifying Recent Changes

StorageLibrary T40+ Series Installation and User Guide 85 11 11 Working With Cartridges and Barcodes This chapter describes how to work with cartrid

Strany 95 - Troubleshooting Matrix

86 Shipping or Transporting the StorageLibrary Write-Protecting Cartridges All cartridges have a write-protect (write-inhibit) switch to prevent acc

Strany 96

StorageLibrary T40+ Series Installation and User Guide 87 12 12 Troubleshooting The library includes advanced system monitoring and alerting mechani

Strany 97

88 Shipping or Transporting the StorageLibrary Closing RAS Tickets After using the information in the RAS ticket to resolve your library issue, use

Strany 98

StorageLibrary T40+ Series Installation and User Guide 89 RAS Ticket Severity Level Display Message Description Suggested Action R0206 High Driv

Strany 99

StorageLibrary T40+ Series Installation and User Guide ix Tables Table 1. Date Transfer Rates...

Strany 100

90 Shipping or Transporting the StorageLibrary RAS Ticket Severity Level Display Message Description Suggested Action R1129- R112C Urgent Failed

Strany 101 - StorageLibrary

StorageLibrary T40+ Series Installation and User Guide 91 RAS Ticket Severity Level Display Message Description Suggested Action R3002 Urgent T

Strany 102 - Packing the StorageLibrary

92 Shipping or Transporting the StorageLibrary RAS Ticket Severity Level Display Message Description Suggested Action R6012 High Drive n Tape A

Strany 103 - 14 Specifications

StorageLibrary T40+ Series Installation and User Guide 93 Interpreting LEDs LEDs provide a visual indication of the status of certain library compo

Strany 104 - Library Component Weights

94 Shipping or Transporting the StorageLibrary Verifying Hardware 1. If you are using SCSI, the library uses one SCSI ID for each SCSI tape drive.

Strany 105 - Climatic Specifications

StorageLibrary T40+ Series Installation and User Guide 95 Troubleshooting Matrix The tables below describe different problem situations and suggeste

Strany 106

96 Shipping or Transporting the StorageLibrary Table 8. Troubleshooting Matrix - Cartridge Movement with Solution Problem Solution Cartridge Movem

Strany 107 - EMC Approvals

StorageLibrary T40+ Series Installation and User Guide 97 Table 9. Troubleshooting Matrix - Media with Solution Problem Solution Media Media barco

Strany 108 - Conformity Declarations

98 Shipping or Transporting the StorageLibrary Problem Solution SCSI problems Make sure that the correct host controller card is installed. Verify

Strany 109 - 16 Approved Drive Types

StorageLibrary T40+ Series Installation and User Guide 99 Table 13. Troubleshooting Matrix - Write or Read Issues with Solution Problem Solution Wr

Komentáře k této Příručce

Žádné komentáře